![[Home]](http://wiki.linux-vserver.org/skins/common/images/wiki.png)
We currently migrate to MediaWiki from our old installation, but not all content has been migrated yet. Take a look at the Wiki Team page for instructions how to help or browse through our new wiki at wiki.linux-vserver.org to find the information already migrated.
This is a quick-and-dirty Slackware Vserver Howto as I haven't seen anything about vserver on slack. The advantage of this approach is that you can easily setup new vsevers and keep all of them up to date with the slackware packaging system, with just few commands.
First I assume you have successfully compiled and booted a kernel with vserver patch, installed the util-vserver package and created a /vservers with the chroot-barrier.
Then, put all your preffered slack packages on some dir, eg /slackware, respecting the default disk sets hierarchy. You can leave just the most essential packs, like some of the a, ap, n and l sets.
Now copy and edit the /etc/profile and all the rc.d's scripts you want to some place, for example /scripts. Do a chmod +x to any script you want to start at the vserver initialization, and a -x to what you dont want.
Create a default skeleton for your vserver's config (skel.conf) and put it the the same dir of the scripts. You'll also need a tgz file with a small /dev folder containing the following devices/subfolders:
crw-r--r-- 1 root root 1, 7 2004-09-13 00:00 full -rw-r--r-- 1 root root 0 2004-09-13 00:00 hdv1 srw-rw-rw- 1 root root 0 2005-07-23 09:35 log crw-r--r-- 1 root root 1, 3 2004-09-13 00:00 null crw-r--r-- 1 root root 5, 2 2004-09-13 00:00 ptmx drwxr-xr-x 2 root root 0 2005-07-22 18:28 pts crw-r--r-- 1 root root 1, 8 2004-09-13 00:00 random crw-r--r-- 1 root root 5, 0 2004-09-26 15:15 tty crw-r--r-- 1 root root 1, 9 2004-09-13 00:00 urandom crw-r--r-- 1 root root 1, 5 2004-09-13 00:00 zero
Create the following /usr/local/bin/mkjail script:
#!/bin/bash # # mkjail v0.2: chroot jail maker (slack 10.1.0) # feedback: rhatto at riseup.net | GPL # # adjust this to where your things live PACKAGES="/storage/vserver/slack/" DEVICES="/storage/vserver/devices.tar.gz" SCRIPTS="/storage/vserver/etc/" GPGKEY="/storage/vserver/slack/GPG-KEY" SKEL="/storage/vserver/skel.conf" if (($# != 1)); then echo "usage: $0 <server-name>" exit 1 fi server=$1 mkdir /vservers/$server echo "instaling packages..." cd $PACKAGES for dir in a ap n extra contrib; do cd $dir; installpkg -root /vservers/$server *tgz; cd .. done echo "creating /etc/ and copying init scripts" rsync -Cav $SCRIPTS/ /vservers/$server/etc/ cp /etc/resolv.conf /vservers/$server/etc/ cp /etc/localtime /vservers/$server/etc/ echo /dev/hdv1 / ext2 defaults 1 1 > /vservers/$server/etc/fstab echo /dev/hdv1 / ext2 rw 0 0 > /vservers/$server/etc/mtab echo "creating devices and dependencies" cd /vservers/$server/ tar zxvf $DEVICES chroot /vservers/$server/ sbin/ldconfig echo "creating /etc/vservers/$server.conf" cp $SKEL /etc/vservers/$server.conf echo "importing slack gpg pubkey" mkdir /vservers/$server/root/.gnupg gpg --homedir /vservers/$server/root/.gnupg --import $GPGKEY # todo: add rebootmgr echo "done; now edit /etc/vservers/$server.conf" echo "then, set iptables rules and start $server vserver" echo "dont forget to change root's password"
The trick is that you can ask installpkg to install a tgz in a rootdir other than /.
Now you simple need to do a
mkjail your-server
and then edit /etc/vservers/your-server.conf, assigning an ip to it, choosing the capabilities, etc, and
vserver your-server start
Now you have a slackware vserver.
For the first time you start or stop your vserver maybe you get some errors from the scripts like rc.6 trying to umount devices or something like. Just remove these commands from the scripts and everything works fine.
To upgrade your vservers, simple use something like this fabulous script:
#!/bin/sh
#
# vserver-upgrade v0.2: fabulous script for slack vserver upgrade
# feedback: rhatto@riseup.net | GPL
#
# Uses some functions from pkgtools, which license is:
#
# Copyright 1999 Patrick Volkerding, Moorhead, Minnesota, USA
# Copyright 2001, 2002, 2003 Slackware Linux, Inc., Concord, California, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
PACKAGE_DIR=/storage/packages/patches/
# pkgtool stuff
package_name() {
STRING=`basename $1 .tgz`
# Check for old style package name with one segment:
if [ "`echo $STRING | cut -f 1 -d -`" = "`echo $STRING | cut -f 2 -d -`" ]; then
echo $STRING
else # has more than one dash delimited segment
# Count number of segments:
INDEX=1
while [ ! "`echo $STRING | cut -f $INDEX -d -`" = "" ]; do
INDEX=`expr $INDEX + 1`
done
INDEX=`expr $INDEX - 1` # don't include the null value
# If we don't have four segments, return the old-style (or out of spec) package name:
if [ "$INDEX" = "2" -o "$INDEX" = "3" ]; then
echo $STRING
else # we have four or more segments, so we'll consider this a new-style name:
NAME=`expr $INDEX - 3`
NAME="`echo $STRING | cut -f 1-$NAME -d -`"
echo $NAME
fi
fi
}
# vserver stuff
cd $PACKAGE_DIR
for file in `ls *tgz`; do
pack=`package_name $file`
for installed in `ls /var/log/packages/$pack* 2> /dev/null`; do
if [[ "$pack" == "`package_name $installed.tgz`" ]]; then
if [[ "`basename $installed`" != "`basename $file .tgz`" ]]; then
upgradepkg $file
fi
fi
done
for vserver in `ls /vservers`; do
for installed in `ls /vservers/$vserver/var/log/packages/$pack* 2> /dev/null`; do
if [[ $pack == `package_name $installed.tgz` ]]; then
if [[ "`basename $installed`" != "`basename $file .tgz`" ]]; then
ROOT=/vservers/$vserver upgradepkg $file
fi
fi
done
done
done
Don't forget to put a
export FTP_PASSIVE=1
on your default /etc/profile.